Pile Content 100%
Polypropylene
Primary Backing Non
woven (PES/PA)
Secondary Backing Glass
Reinforced PVC
Width 50 x 50cm
Pile Weight 850gm2
Total Weight 5000gm2
Pile Height 4/5mm
Total Height 8mm
Gauge 1/12th
Stitch Rate 10
(40 per 100mm)
Stitch Density 120
Avg Pile Yarn Density 6000
Weight Density 154500
Flammability BS4790
Low Radius of Ignition
Smoke Density ASTM E662
Less than 450
Static Propensity AATCC-134
under 3.5KV
Colour Fastness To Light 5/5
on Grey Scale
Hexapod Test ASTM
D-5252 ( 75% Pile Retention after 4000 cycles
Soiling Propensity AATCC
123 Grey Scale 5
Dimensional Stability Din
54318 < 0.20%
Installation For
commercial locations this product must be fully adhered to the subfloor
strictly in accordance with British Standards BS 5325 1996. The subfloor must
be smooth, clean and dry with an adequate damp proof membrane. We recommend the
use of Laybond adhesive or equally approved products. It is essential a check
is made to confirm the recommended and approved adhesive prior to fitting.
Please check with your local representative or adhesive manufacturer.
Maintenance Vacuum
for normal day to day cleaning with suitable industrial cleaner. For commercial
cleaning, using dry chemical extraction or the hot water extraction method is
recommended when required, depending on local conditions.
Guarantee 10years
Sold per box each box contains 5 sqm |